Results 1 to 1 of 1

Thread: IPv6 and IPv4!

  1. #1
    Join Date
    Jan 2017
    Posts
    1

    Default IPv6 and IPv4!

    I’m using Amanda in SLES 11.
    I followed a test configuration found on the web. All work well if I have IPv6 enabled, but with IPv4 disabled amdump does not work and it return:
    ERROR planner Request to sles11.rex.it failed: error sending REQ: send REQ to sles11.rex.it failed: Socket operation on non-socket
    on log file.

    This seem to be a known problem, on some documents I read:
    Either, fix your system to not return IPv6 address to amanda
    or enable IPv6 in the kernel

    but how to fix my system to not return IPv6?
    On my test environment I use /etc/hosts for name resolving, and I don’t have any IPv6 address configured for the name I use.

    Thanks for any help
    Last edited by johnpham; January 18th, 2017 at 10:13 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •