Results 1 to 2 of 2

Thread: Find out current drive position

  1. #1
    Join Date
    Nov 2014
    Posts
    1

    Default Find out current drive position

    How can I figure out the actual position (drive in front of which slot) of the drive? I read through the amanda commands but didn't find any appropriate command. We created a script for amanda to ShowNextBackup/ArchiveTapesNeeded, in order we are scanning what tapes are actual in the loader but after scanning the drive is not in front of the next tape that amanda expects to use. Our tape drive is an Eternus LT20 with 8 slots. I hope you can help.
    Last edited by secunet; November 25th, 2014 at 03:06 AM.

  2. #2
    Join Date
    Feb 2015
    Posts
    1

    Default

    I read through the amanda commands but didn't find any appropriate command. We created a script for amanda to ShowNextBackup/ArchiveTapesNeeded, in order we are scanning what tapes are actual in the loader but after scanning the drive is not in front of the next tape that amanda expects to use. Our tape drive is an Eternus LT20 with 8 slots. I hope you can help.??


    _______________
    [url]http://www.learnalanguage.com/[/url]
    [url]http://www.cca.edu/[/url]
    [url]http://hsbc.edu/[/url]
    Last edited by uhappyy; February 20th, 2015 at 09:00 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •