Results 1 to 2 of 2

Thread: Strange Problem: Failures if one Windows system down

  1. #1
    Join Date
    Jul 2014
    Posts
    1

    Default Strange Problem: Failures if one Windows system down

    i,

    I am using 3.3.5.

    I don't know if this is a client problem, but it only happens with windows client machines. If a unix machine is down, its backup is simply skipped and all other machines get backed up fine.

    See logs:

    PC1 was actually down, but this caused PC2's backup to fail partially. Sometimes both PC2 and 3 will fail, partially or even completely, sometimes the other backups run fine. I don't see a reason why, at least PC 2 and 3 should have been backed up. Same thing happens if PC2 or 3 are offline. Normally the machines are turned on at night using Wake Up On LAN, backed up, and turned off. Sometimes WOL fails because some wise guy pulled the power cord off the wall or so, but IMHO this should not break other machine's backups.

    I already removed all other (unix based) machines from this backup set to avoid missed backups.

    Log excerpt:

    FAILURE DUMP SUMMARY:
    planner: ERROR Request to PC1.mynet failed: No route to host
    PC1.mynet WakeOnLan_C lev 0 FAILED [Request to PC1.mynet failed: No route to host] this correct
    PC2.mynet WakeOnLan_C lev 1 FAILED [data timeout] this is strange as the machine was up and responding
    PC2.mynet WakeOnLan_C lev 1 partial taper: successfully taped a partial dump
    PC2.mynet WakeOnLan_C lev 1 FAILED [data timeout]
    PC2.mynet WakeOnLan_C lev 1 partial taper: successfully taped a partial dump

    DUMPER STATS TAPER STATS
    HOSTNAME DISK L ORIG-GB OUT-GB COMP% MMM:SS KB/s MMM:SS KB/s
    ------------------------------------------------------ ---------------------- -------------- -------------
    PC1.mynet WakeOnLan_C FAILED
    PC2.mynet WakeOnLan_C 1 0 -- PARTIAL 33:58 45.7 PARTIAL
    PC3.mynet WakeOnLan 1 5 3 62.4 12:07 4744.9 12:06 4753.2

    (brought to you by Amanda version 3.3.5)

  2. #2
    Join Date
    Jun 2014
    Posts
    22

    Default

    Please write did you decide your problem?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •