Results 1 to 2 of 2

Thread: clean up log/log file on aborted amrecover

  1. #1
    Join Date
    Jan 2007
    Location
    Richland, WA [USA]
    Posts
    78

    Default clean up log/log file on aborted amrecover

    We wanted to make sure we could recover a file from a backup, so I started a quick amrecover session to get back one small file as a test. Once the file was recovered (but before the entire backup tarball was processed) we hit Ctrl-C to abort the amrecover.

    The system admin then went to the system in question, tried to do an amrecover, and got a cryptic error message (something about "can't read header" or whatever - the sysadmin of the system in question relayed the info generically). I found that the file /etc/amanda/XXXXset1/log/log was there, and had:

    INFO amidxtaped amidxtaped

    in it. Moving this file elsewhere (basically, removing it) allowed the amrecover to work correctly. When the real amrecover of about 90GB of data was complete, the file disappeared on its own.

    So, the simple thought was to trap INT, QUIT and other signals and clean-up this log file (and/or stop the recovery in process.) An alternative strategy would be to add information on which host/client was doing the recover, and printing a less cryptic message like:

    "Only one system may do an amrecover at a time. Please check with the
    administrator on system yyyy to see if they are done. If you are sure that
    no administrators are recovering data, please remove the file .../log/log on
    the Amanda tape server to allow your amrecover to continue."

    This was done while running Amanda-2.5.1p3-1 on a Linux Redhat AW4 system as the server, with Amanda-2.5.1p2 running on an SGI IRIX64-6.5.30 system as the amrecover client.

    Cheers,

    -Andrew

  2. #2
    Join Date
    Nov 2005
    Location
    Canada
    Posts
    1,015

    Default

    The complete error message should have be:
    -----------------------------------------------------------------------------------
    /etc/amanda/XXXXset1/log/log exists: amdump or amflush is already running, or you must run amcleanup
    amrecover: short block 0 bytes
    UNKNOWN file
    amrecover: Can't read file header
    Extractor child exited with status 1
    -----------------------------------------------------------------------------------
    While the first line say it is amdump or amflush, it can be any amanda program that use the tape driver (amidxtaped in this case).
    you should not remove the log, run 'amcleanup XXXXset1' on the server if no amanda process is using the tape driver.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •