Results 1 to 2 of 2

Thread: amtapetype Error setting FSF_AFTER_FILEMARK on Solaris

  1. #1
    Join Date
    Aug 2011
    Location
    Silicon Valley, CA
    Posts
    1

    Default amtapetype Error setting FSF_AFTER_FILEMARK on Solaris

    I have compiled and build Amanda 3.3.0 release from source on Solaris 11 Express for x64.

    When I try to run the amtapetype command to get tape configuration from my Ultrium 2 (LTO-2) tape drive, I get the following:

    -bash-4.1$ ./amtapetype -f /dev/rmt/0n
    Checking for FSF_AFTER_FILEMARK requirement
    amtapetype: Error setting FSF_AFTER_FILEMARK: Success at ./amtapetype line 419.

    This exits very quickly (less than 5 minutes) and does not output any other configuration information. I am not even sure it is doing any writes to the tape.

    We have a Sun StorageTek C4 tape robot (with the aforementioned Ultrium 2 tape drive) that we want to get working. Mtx and Solaris show everything is fine. I can use the mtx command to change tape and everything.

    Am I doing something wrong or is there a bug in Amanda 3.3 for Solaris?

    Thanks,
    Michael

  2. #2

    Default amtapetype Error setting FSF_AFTER_FILEMARK on Solaris

    thanks for sharing the post

    [url=http://www.alliancecorp.com.au]buyers advocate melbourne[/url]

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •