Page 3 of 3 FirstFirst 123
Results 21 to 24 of 24

Thread: straight forward installation tutorials

  1. #21

    Default

    sir I have error on my backup

    ========

    sh-3.2$ amcheck DailySet1
    Amanda Tape Server Host Check
    -----------------------------
    Holding disk /dumps/amanda: 6819840 KB disk space available, using 6717440 KB
    slot 1:read label `DailySet1-01', date `X'.
    NOTE: skipping tape-writable test
    Tape DailySet1-01 label ok
    NOTE: conf info dir /etc/amanda/DailySet1/curinfo does not exist
    NOTE: it will be created on the next run.
    NOTE: index dir /etc/amanda/DailySet1/index does not exist
    NOTE: it will be created on the next run.
    Server check took 1.970 seconds

    Amanda Backup Client Hosts Check
    --------------------------------
    Client check: 1 host checked in 2.731 seconds. 0 problems found.

    (brought to you by Amanda 2.6.1p1)


    kindly help me on this... thanks

  2. #22
    Join Date
    Oct 2005
    Posts
    1,559

    Default

    amcheck output looks good.

    If amdump has failed, please look at amdump.1 file in /etc/amanda/<configuration name>/ directory.

    Paddy

  3. #23

    Default

    sir pady, heres my amdump -what does this means?
    failed queue:
    0: localhost.localdomain //segaserv/myfiles
    DONE QUEUE: empty


    planner: HAVE_MMAP NEED_STRSTR HAVE_SYSVSHM AMFLOCK_POSIX AMFLOCK_FLOCK
    planner: AMFLOCK_LOCKF AMFLOCK_LNLOCK SETPGRP_VOID ASSERTIONS
    planner: AMANDA_DEBUG_DAYS=4 BSD_SECURITY USE_AMANDAHOSTS
    planner: CLIENT_LOGIN="amandabackup" CHECK_USERID HAVE_GZIP
    planner: COMPRESS_SUFFIX=".gz" COMPRESS_FAST_OPT="--fast"
    planner: COMPRESS_BEST_OPT="--best" UNCOMPRESS_OPT="-dc"
    READING CONF INFO...
    planner: timestamp 20090925010001
    planner: time 0.001: startup took 0.001 secs

    SENDING FLUSHES...
    ENDFLUSH

    SETTING UP FOR ESTIMATES...
    planner: time 0.001: setting up estimates for localhost.localdomain://segaserv/myfiles
    localhost.localdomain://segaserv/myfiles overdue 14512 days for level 0
    setup_estimate: localhost.localdomain://segaserv/myfiles: command 0, options: none last_level -1 next_level0 -14512 level_days 0 getting estimates 0 (-2) -1 (-2) -1 (-2)
    planner: time 0.001: setting up estimates took 0.000 secs

    GETTING ESTIMATES...
    driver: pid 16297 executable /usr/libexec/amanda/driver version 2.6.1p1
    driver: tape size 102400000
    driver: adding holding disk 0 dir /dumps/amanda size 6717440 chunksize 1048576
    reserving 6717440 out of 6717440 for degraded-mode dumps
    taper: pid 16301 executable taper version 2.6.1p1
    driver: send-cmd time 0.038 to taper: START-TAPER 20090925010001
    driver: started dumper0 pid 16303
    driver: send-cmd time 0.056 to dumper0: START 20090925010001
    driver: started dumper1 pid 16304
    driver: send-cmd time 0.065 to dumper1: START 20090925010001
    driver: started dumper2 pid 16305
    driver: send-cmd time 0.070 to dumper2: START 20090925010001
    driver: started dumper3 pid 16306
    driver: send-cmd time 0.072 to dumper3: START 20090925010001
    driver: start time 0.073 inparallel 4 bandwidth 8000 diskspace 6717440 dir OBSOLETE datestamp 20090925010001 driver: drain-ends tapeq FIRST big-dumpers sssS
    dumper: pid 16303 executable dumper0 version 2.6.1p1
    dumper: pid 16304 executable dumper1 version 2.6.1p1
    dumper: pid 16305 executable dumper2 version 2.6.1p1
    dumper: pid 16306 executable dumper3 version 2.6.1p1
    planner: time 0.277: got partial result for host localhost.localdomain disk //segaserv/myfiles: 0 -> -2K, -1 -> -2K, -1 -> -2K
    planner: time 0.951: got partial result for host localhost.localdomain disk //segaserv/myfiles: 0 -> 0K, -1 -> -2K, -1 -> -2K
    taper: using label `DailySet1-01' date `20090925010001'
    driver: result time 1.351 from taper: TAPER-OK
    driver: state time 1.351 free kps: 8000 space: 6717440 taper: idle idle-dumpers: 4 qlen tapeq: 0 runq: 0 roomq: 0 wakeup: 0 driver-idle: not-idle
    driver: interface-state time 1.351 if default: free 8000
    driver: hdisk-state time 1.351 hdisk 0: free 6717440 dumpers 0
    planner: time 1.954: got result for host localhost.localdomain disk //segaserv/myfiles: 0 -> 0K, -1 -> -2K, -1 -> -2K
    planner: time 1.954: getting estimates took 1.953 secs
    FAILED QUEUE:
    0: localhost.localdomain //segaserv/myfiles
    DONE QUEUE: empty

    thank you in advance

  4. #24

    Default

    sir I think I know the problem, i've been looking through the logs and it seems that i dont have a schedule from planner.

    i'll keep you posted as soon as I found the solutions

    thank you and more power

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •