Page 6 of 6 FirstFirst ... 456
Results 51 to 57 of 57

Thread: AIC7xxx detected but no scsi /dev/???

  1. #51
    Join Date
    Oct 2006
    Posts
    30

    Default

    Boy are we looking good now...

    [amandabackup@austin root]$ lsscsi -g
    [0:0:1:0] disk IBM DDYS-T36950N S96H /dev/sda /dev/sg0
    [0:0:11:0] tape SONY SDX-700C 0204 /dev/st0 /dev/sg1
    [0:0:12:0] mediumx SONY LIB-81 0106 - /dev/sg2
    [amandabackup@austin root]$ mtx -f /dev/sg2 status
    reading: Driver_status=0x06 (DRIVER_TIMEOUT,SUGGEST_OK)
    Storage Changer /dev/sg2:1 Drives, 8 Slots ( 0 Import/Export )
    Data Transfer Element 0:Empty
    Storage Element 1:Full
    Storage Element 2:Full
    Storage Element 3:Full
    Storage Element 4:Full
    Storage Element 5:Full
    Storage Element 6:Full
    Storage Element 7:Full
    Storage Element 8:Full
    [amandabackup@austin root]$ cat /proc/scsi/scsi
    Attached devices:
    Host: scsi0 Channel: 00 Id: 01 Lun: 00
    Vendor: IBM Model: DDYS-T36950N Rev: S96H
    Type: Direct-Access ANSI SCSI revision: 03
    Host: scsi0 Channel: 00 Id: 11 Lun: 00
    Vendor: SONY Model: SDX-700C Rev: 0204
    Type: Sequential-Access ANSI SCSI revision: 02
    Host: scsi0 Channel: 00 Id: 12 Lun: 00
    Vendor: SONY Model: LIB-81 Rev: 0106
    Type: Medium Changer ANSI SCSI revision: 02
    [amandabackup@austin root]$

    [amandabackup@austin root]$ amtape DailySet1 reset
    amtape: changer is reset, slot 1 is loaded.
    [amandabackup@austin root]$

  2. #52
    Join Date
    Apr 2006
    Posts
    116

    Default amlabel

    run this:
    amlabel DailySet1 DailySet1-1 slot 1
    amlabel DailySet1 DailySet1-1 slot 2

    thanks

  3. #53
    Join Date
    Apr 2006
    Posts
    116

    Default error

    Sorry i made an error in the last post please run this instead:
    amlabel DailySet1 DailySet1-1 slot 1
    amlabel DailySet1 DailySet1-2 slot 2

  4. #54
    Join Date
    Oct 2006
    Posts
    30

    Default

    [amandabackup@austin root]$ amlabel DailySet1 DailySet1-1 slot 1
    amlabel DailySet1 DailySet1-2 slot 2amlabel: label DailySet1-1 doesn't match labelstr "^DailySet1[0-9][0-9]*$"

  5. #55
    Join Date
    Apr 2006
    Posts
    116

    Default regex

    did you comment out this line from amanda.conf?
    labelstr "^DailySet1[0-9][0-9]*$" # label constraint regex: all tapes must matc

  6. #56
    Join Date
    Oct 2006
    Posts
    30

    Default testing labeling

    [amandabackup@austin DailySet1]$ amlabel DailySet1 DailySet1-1 slot 1
    labeling tape in slot 1 (/dev/nst0):
    rewinding, reading label Daily1
    rewinding, writing label DailySet1-1, checking label, done.

    [amandabackup@austin DailySet1]$ amlabel DailySet1 DailySet1-2 slot 2
    amlabel: could not load slot "2": Unloading drive 0 into Storage Element 1...writing: Driver_status=0x06 (DRIVER_TIMEOUT,SUGGEST_OK)
    [amandabackup@austin DailySet1]$

  7. #57
    Join Date
    Apr 2006
    Posts
    116

    Default info

    Hello,
    1. Please post the last couple chg-zd-mtx logs from /tmp/amanda/ directory, you could
    also tar up /tmp/amanda directory and e-mail it to me.
    2. Also look in the /var/adm/messages for scsi errors and post them
    Pavel

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •