PDA

View Full Version : Tape label



skuali
April 30th, 2007, 12:00 AM
Hi all,

is there any amanda command to find the label of the tape that is in the current slot? I have taken a look at some of them (amadmin, amtape...) but they don't work.
Thanks in advance for your answer.

Skuali.

martineau
April 30th, 2007, 05:15 AM
If you have a changer, you can run 'amtape <config> slot current'.
If you don't have a changer, run 'amcheck -t <config>'.