PDA

View Full Version : Error backing up one directory



danield
February 17th, 2010, 06:27 AM
When I perform my backups, one directory out of all my backups fails consistently, with the error below backing up /home:

workerbee.igb.uiuc.edu:/etc 0 0g finished (9:19:05)
workerbee.igb.uiuc.edu:/home 1 failed: dumper: [request failed: Cannot assign requested address](too)

Mountpoint layout is:
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 4.6T 1.9T 2.5T 42% /
/dev/sda2 95G 4.9G 85G 6% /var
/dev/sdb1 289M 32M 242M 12% /boot
tmpfs 32G 0 32G 0% /dev/shm
/dev/sdb2 275G 86G 176G 33% /var/lib/mysql
none 32G 112K 32G 1% /var/lib/xenstored
/dev/sdc 2.7T 2.3T 330G 88% /mnt/disk



Other directories on the same machine save appropriately, but this one always fails. Any ideas?

martineau
February 21st, 2010, 03:26 AM
Use a large range for reserved-tcp-port.

You can get the current value with
amgetconf CONF reserved-tcp-port