PDA

View Full Version : amlabel error



hamselv
October 6th, 2006, 02:21 AM
I get this error when I try to label other tapes in my library other than the one in slot 0 (1)

amlabel: could not load slot "1": could not read result from "/usr/lib64/amanda/chg-scsi"

This is the one thats not erroring out on me
$amlabel prototype Prototype-000 slot 0
labeling tape in slot 0 (/dev/nst0):
rewinding, reading label no-label
rewinding, writing label Prototype-000, checking label, done.

ppragin
October 6th, 2006, 09:41 AM
Please get me this information so i can help you:
I am assuming this is a Linux system!
1. cat /proc/scsi/scsi
2. please post you amanda.conf
3. If you know what the device name for your changer is please run( it could be /dev/sg0):
mtx -f /dev/devicename status
4. amadmin x version
thanks

hamselv
October 12th, 2006, 03:18 AM
Had the changer conf wrong.

added the correct changer dev - /dev/sg2

Per