View Full Version : amtape DailySet1 show --- asks for slot 2 ??

July 13th, 2006, 07:14 PM
-sh-3.1$ amtape DailySet1 show
changer: got exit: 0 str: 1 99 1
changer_query: changer return was 99 1
changer_query: searchable = 0
amtape: scanning all 99 slots in tape-changer rack:
changer_find: looking for NULL changer is searchable = 0
changer: got exit: 0 str: 1 /dev/nst0
slot 1: date X label DailySet1-04
insert tape into slot 2 and press return

runtapes 1 # number of tapes to be used in a single run of amdump
tpchanger "chg-manual" # the tape-changer glue script
tapedev "/dev/nst0" # the no-rewind tape device to be used
rawtapedev "/dev/null" # the raw device to be used (ftape only)
changerfile "/etc/amanda/DailySet1/changer.conf"
changerdev "/dev/null"
maxdumpsize -1 # Maximum number of bytes the planner will schedule
# for a run (default: runtapes * tape_length).
tapetype Quantum-LTO2 # what kind of tape it is (see tapetypes below)
labelstr "^DailySet1-[0-9][0-9]*$" # label constraint regex: all tapes must match

amrecover_do_fsf yes # amrecover will call amrestore with the
# -f flag for faster positioning of the tape.
amrecover_check_label yes # amrecover will call amrestore with the
# -l flag to check the label.
amrecover_changer "/dev/null" # amrecover will use the changer if you restore


define tapetype Quantum-LTO2 {
comment "Quantum LTO2 (hardware compression off)"
length 186368 mbytes
filemark 0 kbytes
speed 2781 kps

-sh-3.1$ rpm -qa |grep amanda-backup