PDA

View Full Version : Amanda 3.3.x Installation, Configuration and Administration


Pages : [1] 2
  1. Amanda 3.3.0beta1 released
  2. Different Server & Client Versions
  3. Using Removable HDD's as Virtual Tapes
  4. Amanda Backup Solution Issues in CentOS 5.6
  5. High load: Amidxtaped
  6. Amanda 3.3.0 released
  7. Amanda 3.3.0 client on Mac OS-X
  8. conflicting packages
  9. missing results - failed dump
  10. Removable HDD spin down
  11. custom compile
  12. Use several removable HDDs' for differents backup locations
  13. spanning across multiple removable hdds
  14. Upgrade form 2.5.2 - things to consider
  15. Slow backup
  16. amanda not emailing to change vtape (removable HDD)
  17. Switching HDD is not successful
  18. Error locking '/backups/state'
  19. Installation problem on 3.3.0
  20. amcheck-client
  21. more amdump.20110727141903.debug
  22. amlabel and blocksize
  23. Backing up the Amanda server itself
  24. Is there an amanda pre-compiled package for Solaris 10 sparc
  25. amtapetype Error setting FSF_AFTER_FILEMARK on Solaris
  26. Having more then 99 tapes
  27. amdump was very fast(too fast)
  28. tapetype HARDDISK length question
  29. amcheck: Port xxxx not secure (only on hosts outside of firewall)
  30. Amrecover 'Always' segfaults - how to debug this ?? Is it related toamanda-client ??
  31. Benefit of Amanda Linux Client
  32. SAMBA backup not respective exclude?
  33. Problems with chg-aggregate ?
  34. amcheck problems with some backups...
  35. amtapetype HP Ultrium LT02
  36. Amanda 3.3 client documentation
  37. Basic Basics -- Installing Amanda Community 3.3.0 Server
  38. amtape device command
  39. Configuring to write 2 tape drives in parallel - issues
  40. amlabel device.c assertion failed error
  41. amrecover fail on upgrade from 2.5.2p1 -> 3.3 using vtapes
  42. no useable tapes and tapelist.lock
  43. Connection refused
  44. Taper fails
  45. How to backup in 2 Tapes.
  46. Backup to External ESATA Drives.
  47. Build Client?
  48. No incremental for CIFS shares?
  49. holdingdisk unusable?
  50. amrecover issues: partial solution
  51. Confusion with tape changer configuration
  52. Amdump failing after upgrade while spanning tapes
  53. Restoring fails with amrecover with "
  54. Amanda installation
  55. Oracle Database backup w/o RMAN
  56. tapedev and tpchanger
  57. Getting my config for spanning tapes correct
  58. amanda client on Solaris 8?
  59. amrecover fails: [No dumps available on or before date]
  60. amcheck with 1 fault found: dump will not be able to create...
  61. issue with amrecover
  62. 3.3.0 Local client works, remote fails
  63. No acceptable volumes found
  64. RAIT: inventory not supported by this changer
  65. amidxtaped[20906]: segfault
  66. amrecover files with quotes in path
  67. amcheck-device terminated with signal 11
  68. amcheck running as root, no idea what i'm doing.
  69. Amanda 3.3.0 ubuntu
  70. amcheck-device terminate with signal 11 (right forum part)
  71. noob-type question regarding s3
  72. Amanda suitable for us? Planing Backup System
  73. Amanda 3.3.1 released
  74. amrecover extract fails "Got no header and data from server"
  75. New Install on New Ubuntu 11.10 Server: amcheck-device terminated with signal 11
  76. cronjob for amanda not working.
  77. Is zmanda a good solution?
  78. Amazon S3 backup confusion
  79. Amanda 3.3.0 not honoring exclude directive?
  80. amrecover stucks when choice for "set owner/mode for '.' is made
  81. Default file permissions
  82. Something is limiting dumps to 1024kps?
  83. amcheck-device: Can't call method "status" on an undefined value
  84. Deleted /var/lib/amanda/gnutar-lists directory
  85. amandabackup user error on all non amandaservers
  86. amrecover error -- Got no header and data from server
  87. undefined symbol error after upgrade to Ubuntu 11.04
  88. Always Level 0 backup, why not L1?
  89. Amanda Strange Dump messages
  90. Config tree external drive in rotation.
  91. amcheckdump finds errors in seemingly working backups...
  92. Amanda script API waits for nohup to end
  93. Amanda Getting Started Noob questions
  94. Strange failure
  95. Amanda backup of Windows fails.
  96. Does amanda keep backing up against read errors?
  97. I encountere​d errors messages when I tried to build amanda 3.3.1 on cygwin with perl
  98. amanda 3.3.0 can't be installed on cygwin.
  99. Issues with Tandberg T24 LTO-5
  100. Amanda 3.3.2 released
  101. Amanda overwriting level-0s, leaving me with none, and I can't figure out why
  102. AMCheck returns 0 errors but a warning (i guess).
  103. 3.3.0 on Ubuntu 12.04 LTS misses amandad
  104. postgresql backup doesn't produce a dumpfile with 2+ tarfiles
  105. FAILURE DUMP SUMMARY: amdump: ERROR An Amanda process is already running
  106. Script to send an email with the next tape sequence
  107. Amanda 3.3.2 "MESSAGE Device type tape is not known"
  108. taper: FATAL file xfer-dest-taper-splitter.c
  109. Issue with lexical taperscan and multiple configurations
  110. flush variables: tweaking for holding disk maximize before aging dump data to tape
  111. amrecover to recover subdirectories from windows client
  112. Legacy Library newgetopt.pl Will Be Removed
  113. muti-directories in disklist
  114. taper: critical (fatal): Part numbers do not match
  115. first amcheck gives : CRITICAL **: GLib version too old - 0 problems found
  116. Problem with backups on some servers - Slow or timing out and failing
  117. How to exclude two files on one DLE wit amsamba?
  118. Wierd behavior of taper-parallel-write
  119. Cannot install amanda-backup-client-3.3.2-1 RHEL6 RPM - package conflicts with itself
  120. Running amanda on fedora core 17
  121. debian quantum superloader 3
  122. amaddclient error
  123. Client triggered backups
  124. planner error - program set to application but no application set - new setup 3.3.2
  125. Multiple DailySets or just stick with DailySet1?
  126. Amazon S3 Backup
  127. vTape setup help
  128. Failure dump summary
  129. amcheck on Solaris 10
  130. amrecover and Segmentation Fault
  131. Amanda 3.3.1 + Debian Linux
  132. How to configure cleaning tapes?
  133. Linux server with SCSI HP Autoloader 1/8 920G2 - Can anyone help how to get started?
  134. Question about Amanda capabilities...
  135. Why does the Amanda server 100% parallelise its estimate pass?
  136. Disable automatic restart after data timeout failed
  137. Newbie: will amanda fit my scenario?
  138. Incremental backup fails at level 10
  139. Error message: configuration keyword expected
  140. Permission denied (publickey,gssapi-with-mic,password).
  141. Amanda 3.3.3 released
  142. Windows 7
  143. amtape showing slot empty but tape is in there - why?
  144. Backup 2.5.2 client with 3.3.3 Server?
  145. amdump_client force connection to the wrong port
  146. got empty schedule from planner
  147. Dumper dying while PRE-DLE script is running
  148. How to do selective backup
  149. Is this a bug? Amandad server can't connect to clients via more than one ssh tunnel
  150. Trying to change amandabackup username
  151. Error when changing magazines
  152. Cannot upload iimage on forum
  153. Backup between restricted networks [server and client not in same network]
  154. Backup to multiple remote sites
  155. 501 Could not read config file for DailySet1! Permission denied
  156. How do I enable multiple index_server's to allow restoring from two backup servers?
  157. Scripted Unattended Restore
  158. Question on feature
  159. Failed to use command 'amrestore' in amanda-3.3.3 backup files.
  160. How to backup a 2.4.5p1 server (from 3.3.3 server)
  161. backup clustered guest fileserver
  162. Trouble installing client 3.3.3 on Ubuntu 12.04. amandabackup user exists in LDAP
  163. Getting Started with Amanda article on wiki -> complicated, doesn't work, aarrgh
  164. Problemt to restore via ssh
  165. How to install Amanda 3.3.x on Ubuntu 12.04
  166. AMLABEL fails with perl error
  167. dumpcycle, runspercycle and tapecycle
  168. glib-util.c:45:glib_init: assertion failed
  169. amrecover - can't talk to tape server: service amidxtaped: Help please.
  170. amfetchdump - problem with PERL
  171. My vtape disk partition filled up to 100%
  172. Report Issues
  173. Debian wheezy client install problem
  174. Perl_Gthr_key_ptr error on fresh install of Amanda 3.3.3 on Debian 7 Wheezy
  175. Unknown S3 error with Swift S3 (Openstack)
  176. Backup MooseFS partition.
  177. unable to flush - "process terminated while waiting to flush"
  178. How to install Amanda on Windows Server
  179. Full Backup of Windows server failing.
  180. Amanda 3.3.4 released
  181. Some 3.3.4 remarks
  182. Broken HARDDISK tape?
  183. parse tape label to post-backup script?
  184. How to recover from Amazon S3 bucket?
  185. Change bsdtcp ports on per client basis
  186. how client pull data to server?
  187. Amanda leaves tmp file on holding disk
  188. planner: ERROR Request to berrt.futurroute.local failed: Connection refused
  189. Header issue on 3.1.1 (Solaris 9 SPARC)
  190. amrecover 3.3.1 (debian wheezy) to 2.6.1 server, extract command fails
  191. Upgrade to 3.3.4-1 from 2.6.1
  192. Question on configuring Amanda for full/incremental backups
  193. Amanda 3.3.4 Support Installation and First Step Configuration
  194. amvault - clone latest full & incremental backups to disk. ? How do you do it?
  195. Amanda 3.3.1 on Debian Wheezy configuration issues
  196. Aborted: Reading client-servername:_backup_path for datestamp
  197. Amanda 3.3.4 on FreeBSD 5.5
  198. Windows Client Issues, Again...
  199. Amanda 3.3.4 on FreeBSD 9.1
  200. 3.3.2 Amanda Install CentOs 6.4 - Remote Backup Issues
  201. Yet Another Full / Incremental Question....
  202. Swapping Tapes Mid-Dump
  203. Centos 6.4 Firewall issues and automatic no-reuse question
  204. Automatically label vtapes as no-reuse
  205. Amanda 3.3.4 Script API
  206. Question amcheck
  207. amvault Confusion
  208. amanda 3.3.1-1 problem delay writing to tape
  209. Client check: invalid REQ (RedHat 5.4, auth=local)
  210. Beginning user - Trouble with amanda.conf file
  211. amrecover: empty disk after succesfully dump
  212. Amrecover Options [?/Y/n/s/d]?
  213. partial taper: while reading holding file: Input/output error
  214. Amanda Backups out of sync
  215. Running out of tapes
  216. Backing-up from a Fifo
  217. How does Amanda reassemble a distributed full backup?
  218. Dump speed questions
  219. Amanda is skipping some tape during the backup....
  220. Any way to pass-C option to dump command through Amanda?
  221. Backup failure with CURL error
  222. Backup failures for FreeBSD systems (index tee cannot write [Broken pipe])
  223. cannot open //.amandahosts: No such file or directory
  224. Amanda 3.3.5 released
  225. amtape shows slot empty, but mtx doesn't
  226. How to configure ampgsql for multiple databases
  227. Upgrade of Amanda from 3.1.5 to 3.3.5
  228. 'changerfile' param for tape robots
  229. which forum to use?
  230. 'labelstr' param in amanda.conf
  231. querying device-side compression setting
  232. Amanada full backup - question
  233. Amanda deleting index files
  234. Weird perimssion/setuid issue causing backups to fail?
  235. amlabel errors
  236. RHEL Disk partitioning
  237. tpchanger chg-robot not getting configured properly
  238. Cannot restore locally
  239. unable to run "amrecover DailySet1". Getting NAK message.
  240. deleted holding disks wit amadmin but there is still data in the directories
  241. restore to another host
  242. how to restore if I don't know the config name
  243. HP StoreEver 1/8 G2 LTO-5 Autoloader
  244. Incompatibility between the S3 tapechanger and NeCTAR Openstack
  245. First time config on STK L700 VTL
  246. selfcheck request failed: tcpm_recv_token: invalid size: "amandad: cannot look up..."
  247. fatal error in tpchanger
  248. Amanda 3.3.4 Fedora 19 Firewall issues
  249. How do I enable multiple index_server's to allow restoring from two backup servers?
  250. How do I start with a clean slate?