- Release of amanda-2.6.0
- Backing up to a tape drive connected to a client
- Novice tar install question
- Debian package faults 2.6.0-1
- User was not created..
- Amanda selfcheck error
- Wrong ELF Class error on 64bit RHEL 5
- Amanada Installation
- amlabel - segmentation fault
- Retension, periodice and 5 tapes
- amtapetype does not work
- Amanda 2.6.0 selfcheck request failed tcpm_recv_token: invalid size
- Backup strategy details
- Release of amanda 2.6.0p1
- Can I install a 35GB REV Drive on an Amanda Server?
- Amanda 2.6.0 on Debian Etch
- How to test virtual tape set up in 2.6
- Client attempts to connect on port 0
- Amanda v.s Zmanda
- Trying to setup Amanda 2.6.0 to backup nds volume on Sles10 oes2
- permision denied on label command 2.6.3
- Getting errors when running amcheck -c myconfig
- Windows XP Client - Server Validation Problem
- sendbackup failed
- Where is amgpgcrypt ?
- Empty Planner Amanda 2.6.0p1
- ERROR taper no-tape [No writable valid tape found]
- Installing Amanda Backup Server/Client using Virtual tapes
- Amanda Port & Firewall
- amanda server/client on Ubuntu 8.04
- Which Version Of Amanda?
- Non-standard SSH port configuration
- Selfcheck request failed: No route to host
- ERROR libssl
- Install Amanda 2.6 on Apple Leopard 10.5
- changer.conf entries - IBM TS3100
- 15 minute challenge
- amanda 2.6p1 amrecover index not complete?
- LTO4 Slow, Is my block size configuration being read?
- Full/Incremental and retension
- Fedora 9 problems finding port value to connec to - using port '0'
- tape spanning config not using holding disk?
- amanda-server on fedora core 9
- Ubuntu Amanda Package and 2.5.2.p1 Windows Clients
- Label tapes
- Trying to install 2.6 with S3
- Oracle Clients and RMAN
- connection refused
- Amanda 2.6 install with instructions
- Client backups retry when clients off?
- 2.6 server 2.5 client
- 2 Routines
- backing up VPN clients from outside the VPN?
- Solaris 10 Sparc 2.6.4 broken package
- Connection refused. How to debug problem?
- Installation dependencies question
- amrecover - NAK: amindexd: invalid service, add 'amindexd' as argument to amandad
- [data write: Broken pipe] error
- Amanda 2.6.0 only doing full backups
- Amanda 2.6.0p1 Redhat 2.1
- amrecover: no 'bsdtcp' security driver available
- selfcheck request failed: recv error: Connection reset by peer Client check: 1 host
- Contacting server on quartz.zmanda.com ... [request failed: resolve_hostname(quartz.
- restore location
- Tapelist gone after crash
- 'amandad' on client exits (shuts) after running 'amcheck' on server
- Amanda 2.6.0p2 released
- server error in amcheck
- ZMC & AMANDA basic questions
- Backing up a Windows Client in a Windows Domain
- amcheck with an odd error
- Where did the rpm file and documentation go?!
- amdump crashes with error: chunker: critical (fatal): errors processing config file
- Amanda 2.4.4
- How can I get RPM to recognize the latest version of tar?
- Backing up all on same computer
- Host down?
- Please define these terms
- Amanda must be configured with....
- Why does amrecover try to connect to localhost?
- Cannot Connect(Connection Refused)
- flush-threshold (s) confusion
- creating a client rpm (or package)
- FAILED "Failed reading dump header."
- Announcing the Unofficial Zmanda IRC channel (##zmanda)
- something related to mysql
- sytem state backup
- selfcheck request failed: EOF on read from <host>
- Amanda community edition for Open Solaris and Solaris 10/x86
- Creat dual backups
- Advise and Pointers
- assign a password to amandabackup?
- Advice on backup configuration
- Announcing OpenSolaris images for Amanda 2.6.1alpha
- Amanda amrecover-request failed -connection refused
- Can't Do Incremental Backups
- Corrupted curinfo?
- problem with backing up windows machine
- dumpcycle & runspercycle
- LTO3 performance improvements & blocksize
- 2.6.0p2 on FreeBSD
- amrecover problem
- amanda definitions
- amrecover loads many tapes
- Need help using Amanda with Selinux, firewalls and portranges
- problem with amcheck freebsd
- incremental backup
- amcheck error
- Address family not supported by protocol
- amcheck error on Ubuntu
- Unable to recover backups
- adding script
- Strange Tape Error
- Weekly Full Backup - Unable to find a tape to use
- Messed up 15 minute setup of Amanda community instructions
- Suggestion - Slight correction in ZWC Howto
- amflush returns a protocol error
- xinet.d entries on old clients and new server
- Problems backing up Fedora 9 clients
- need advices on install/configure amanda on solaris 10
- Span Tape Estimator Bug
- Ashamed to mention this version
- amcheck failing
- Amanda conf file... does this look right
- Amreport and 500 Internal server error
- SPARC Solaris Client - Why so hard?
- Minimum Holding Disk Size
- request failed: timeout waiting for REP
- Amstatus question - "stuck" on 99% ?
- Tape write questions - *too fast* ?
- Client Timeout Problem
- problem running amdumpcheck on solaris 10
- is star available to community version ?
- amcheckdump output - questions :)
- amanda's amcheck fail in solaris 10
- tape spanning issue with large DLE
- index tee cannot write [Broken pipe], and Connection reset by peer errors
- <Newbie> ZMC included in Community?
- Odd backup problem with Zmanda Windows client
- "Broken pipe" when chg-disk moves to second (virtual) tape
- default maxdumpsize is not working ?
- Mac OS-X client (Community)
- amrecover security
- backup to disk, without tapes/vtapes
- Backing up large volumes over NFS
- Updating disklist file not being reflected
- tar package problem
- disklist question
- "timeout waiting for REP" For 2/15 Entries
- amcheckdump return errors with samba DLEs
- amcheck and amdump permission problems
- Expecting new tape on re-running amcheck
- no driver for security type 'bsdtcp'
- Stuck at "Getting Estimate"
- Wierdness using amrecover
- amrecover is not using the default tape drive
- Release of Amanda-2.6.1b1
- Server/Client authentication method
- Reset Amanda and remove holding files
- fatal changer error!
- Multiple devices, so multiple autoloaders
- problem with amcheckdump
- Performance query
- Connection Reset by Peer
- tcpm_recv_token: invalid size: amandad:
- amdump backup problem
- file missing from tape after change dumpcycle ??
- self check problem
- restore zwc backup without amfetchdump ?
- problem with virtual tape
- Amanda selfcheck failed / memory corruption
- planner: ERROR Request to client failed: timeout waiting for ACK
- amrecover: label mismatch...
- Size limit for estimation
- Scheduling backups
- New install of 2.6.0p2 - slow speed during backup
- Large DLE fails span
- Preparing migration to v2.6.0
- mixed media
- amanda 2.6.0 cant do incremental
- ask - installing amanda 2.6.0p2 on ubuntu server 8.10
- Still having problems with 2.6
- chg-multi problem
- Release of amanda-2.6.1b2
- amcheck errors HELP!!!
- Backup overwriting problem
- Any one have a document/cheatsheet on configuring Amanda (community) on Solaris 10
- Starting out questions, hold rea, increasing number of tapes, etc.
- Stick here
- Amanda client error (cannot oprn .amandahosts)
- strage error
- Dependancy issues with amanda client 2.6.1b2
- Amanda server 2.6.1 does not detect the tape device
- Large disk - very slow dumping (stays on 0.0% for 1 hour+)
- RAIT problem
- amanda service on client seems to trasition to maintenance on amcheck from server
- libcrypto.so.6 is needed by amanda backup
- Looking to hire freelance Amanda expert!
- Backup Opened Files
- Problem when Amanda running as root
- How to make amdump keep file in tape after remove the file from DLE ..
- amplot text size issue
- Release of amanda-2.6.1
- amlabel /usr/lib/amanda/chg-disk
- Upgrade from 2.6.1b2 to 2.6.1 final
- Problem installing new version 2.6.1. Bug?
- ammt not found
- ERROR: mkdir:/lib/amanda/gnutar-lists failed: No such file or directory
- amtape <config> slot advance (documented change)
- concerning the configuration of ZMC New post
- My tape gets partially deleted every Friday?
- Backup to CIFS share - how?
- Backup to Disk
- Amanda and Overland ARCvault 12
- Having problems with Amanda installation Debian Lenny
- amcheck must be run setuid root
- How to delete slots
- Amanda nad Solaris 9 problem - no incrementals?
- PRE-DLE script appears asynchronous, not synchronous
- Different number on disk label and in the dumped filename
- new install solaris 10 inetd error
- Issues with libamanda-2.6.1.so after re-install
- Full backup to keep?
- amcheck returns "line 1: disk dumptype 'disklist' not found"
- Searching for file without knowing path
- Problem configuring my backup
- Perl issues under Intrepid and 2.6.1
- Amanda, disk-chg and v_tapes
- selfcheck request failed: recv error: Connection reset by peer
- AMTAPE Glib version too old
- Unsupported blocksize on additional tapes
- Problems flushing into Amazon S3
- Holding disk needed?
- problem compile on Md2006
- How much is too much for S3
- auth issues with SSH
- amdump FAILED [Can't switch to degraded mode when using a new disk]
- Configuration for Exabyte 1x7 VXA-2 Autoloader
- problem with amserverconfig
- Error in amtape conf update
- Troubles with CentOS 5.0 missing repositories.
- Management of runtapes parameters
- OK, split dumpo confusion
- Amanda for FileSystem backup
- 2.6.0 kerberos amanda / root uid issue
- Using USB Disks As Tapes
- cannot determine first slot
- Can't switch to incremental dump
- disk /, all estimate timed out
- Issues with OpenSolaris installation