- Amanda 2.5.0 has been released
- Amanda 2.5.0 RPMs available
- Fedora Core 5 RPMs
- Installation on Centos (RHEL4)
- Upgrading from 2.5.0b2 RPMS to 2.5.0 RPMS
- Amlabel: could not load tapelist
- Location of amanda.conf
- Backup strategy / tape configuration
- Lost files in 2.5 rpms
- Amanda server on windows ?
- chg-scsi question
- Srpms?
- Amanda 2.5 Debian UDP problem
- asymmetric encryption
- amcheck behavior when changer needs a new tape
- Amanda 2.5.0p1 RPMs are available
- 2.5.0.p1 on SLES9 x86_64
- amcleanup
- Our first results with amanda
- Problems with Amanda 2.5 installation on Aix 5.1
- 2.5.0 RHEL3 and SLES10 RC1 RPMs available
- Amanda 2.5.0p2 and postfix
- hot swap drives
- glibc problem on centos4 - 2.4.4 and 2.5
- tape spanning with one drive
- Is Zmanda what we need?
- amtape DailySet1 show --- asks for slot 2 ??
- Backup failures, tape write errors
- FC4 upgrade to 2.5.0 problem
- When bad things happen to good Amanda backup servers
- Backup Report & Dumpcycle
- amcheck Problem
- amrecover and client side encryption
- Using All of Tape?
- missing size line from sendbackup
- amlabel - write protect error message
- reorganizing files
- Tar Spanning has "Broken pipe" on RHEL4
- Tar Spanning has "Broken pipe" on RHEL4
- Problem with Client
- Problem with client
- Installation und Dokumentation auf Deutsch!? Docs in German?!
- amanda or amandabackup user id and home directory
- tapetype definitions
- Amanda directories and file locations
- amandahosts and global amanda.conf options
- not allowed to execute the service noop
- Multiple site configuration woes
- amrecover (invalid service)
- Amanda Conf
- Amanda 2.5.1p1 released
- amrecover from Client machine
- Reusing Tapes?
- Tape Changer and chg-scsi
- amlabel error
- tape spanning
- Problem: 2.5.1p1 - "timeout waiting for ACK"
- Problem with older client
- sco open server 5.0.x
- selfcheck request failed: tcpm_recv_token
- selfcheck request failed: timeout waiting for ACK
- New to Amanda
- Spanning tapes without a holding disk - is it possible?
- Problem with amcheck
- Secure backup with untrusted server?
- Problem trying test backups with single server configuration
- amrecover: cannot connect to amandahost: Success
- confused and concerned about backup sizes
- Amanda Server end backup itself occured some problem?
- Connection reset by peer
- data timeout
- amrecover error
- multiple configurations is slow
- Building Amanda
- Error testing virtual Tapes
- Howto make Full Backup
- xinetd and Amanda 2.5.1+
- 2.5.1p1 rpm available in 64-bit ?
- Can't recover files - infinitely asks for tape
- Amanda looking for amandates in WRONG location - Not using client config location
- SERVICE: noop problem
- Permission problem
- Suggestion for INSTALL file
- amtapetype taking 24hrs+
- timeout waiting for ACK
- Amrecover on Samba Share?
- skipping cruft file ?
- DEFAULT_CONFIG, who uses it?
- Support of different users!
- Newbie getting - could not read result from "/usr/lib/amanda/chg--disk"
- Amanda is ALWAYS doing full backups
- Need help on building rpm source
- hardware compression..
- Novell roadmap for Amanda Network backup
- amrecover connection to server refused..
- A TAPE ERROR OCCURRED: [No writable valid tape found] >2.5.1p2 Problem?
- Centrally managing exclude lists from Amanda server?
- dumps of Amanda server's local root partition failing
- selfcheck request failed: Connection Refused
- dump to holdingdisk - if it get full flush it to tapes
- ERROR: NAK 127.0.0.1: access as operator not allowed from operator@localhost
- Amrecover : Connection reset by peer
- amtape: could not reset changer: cannot determine first slot
- Running amverify after amdump
- amandad security-util.c memory allocation errors, core dumps on security scans
- #exclude directories from a backup
- No backup file found under mysql-zrm Backup
- No backup file found under mysql-zrm Backup
- Fedora Core 6 RPMs are available
- problem installing amanda
- AIX 5.1 sendbackup regex "found a bug" error
- Basic Program Question
- Installing Amanda as server and client on same system
- Specifying where to find GNUTAR on client?
- "tapedev /dev/nht0 is offline" and udev
- Installation Problem: RPM package wouldn't install correctly
- Amanda 2.5.1p3 released
- Does Amanda guarantee level-0 backups exist?
- AMANDA and Data Corruption.
- amCheck: selfcheck request failed: tcpm_recv_token: invalid size
- amandad dumping core
- "waiting for flush", "wait for writing to tape" and tape being ready?
- Negative numbers in amstatus taper summary section.
- Backup to disk
- What to do when amcleanup finds zero-length .tmp file in holding disk?
- gentoo Amanda server + windows client - amandaroot and amandabackup...
- BOGUS REQUEST PACKET and bsdtcp
- Amanda exclude files not readable, so not excluding items...
- OS that Amanda Supports
- selfcheck request failed: EOF on read from
- amrecover : connection to server refused
- Can't get amanda services to start...
- Can't label changer tapes...
- Which directories to backup?
- Cannot label new virtual tapes - "tape is active"
- Redhat Server OSX Client - 'Connection Refused' problem
- planner msgs: "got partial result"
- systemimager and Amanda
- Amrecover Error, Fedora Core 6 fresh install
- amrecover from OSX 10.4 client - issues connecting to host
- dumpcycle, runspercycle, tapecycle interactions in moderate backup installation?
- setting number of days (or width) of amoverview output?
- Seeing some amandad processing stuck in FUTEX_WAIT...
- Graphical mode req for amanda backup
- Confused about tape drive
- The Dumps Did Not Finish Properly
- Cold backup or Physical backup
- How to install & configure WEBMIN tool
- herz the files you mentioned before - thanks sweet c ya
- AMRECOVER Failing
- Amanda >>> bare metal recovery <<<
- Amanda using wrong tape order for two tapes
- planner ERROR, timeout waiting for REP
- Needs an amandaserver on windows 2000
- HELP - Amcheck works - Dumps don't - Please Read
- solaris 10 smf and amanda
- Reuse of accidentally filled tapes, automatic or re-labeling required?
- Windows Server 2003 Installer Problem
- Multiple Drive Tape Library
- How to take backup in DLT tapedrive
- Configuration doubts
- Amanda 2.5.2 (beta 1) released
- Remote backup just seems to miss the mark
- amrecover and chg-multi
- GNU tar 1.16-2 Estimate and Dump Problem
- shoe-shining during backup
- Tape label
- amrecover issue
- Amanda 2.5.2 released
- Backuping issue.
- DNAT issue
- amrecover: request failed: timeout waiting for ACK
- ERROR taper no-tape [No more writable valid tape found]
- Command "mode" does not show anything.
- "Unable to write tapelist" from amlabel and amdump
- amanda-2.5.1p3 failed, "FATAL dumper assert", "FATAL chunker error"
- Failure And Strange Dump Summary
- Is there an Amanda Vmware appliance
- driver: FATAL flush line 1: syntax error
- Lot of Doubts in amanda setup.
- OS Getting Crash due to amflush
- amtapetype error
- newbie ? - tapeless operation -> amlabel error
- Netware server backup??
- How can I improve amanda's performance?
- New white paper: Configuring Amanda for Parallel Backups
- old server 2.4.2p2 fails to backup newer client 2.5.1p1
- chg-zd-mtx problem: mtx command doesn't exist
- Amanda 2.5.2p1 released
- Slave restart not guaranteed
- selfcheck request failed: Connection Refused
- Syncpipe failure during buffer advance
- Client (?) configuration problem
- Amanda 2.5.2-1 Selfcheck Request Failed
- Amanda 2.5.2-1 Selfcheck Request Failed
- --with-db=dbm
- General advice on config options
- 501 Could not read config file /etc/amanda/-auth=bsd/amanda.conf!
- 500 Access not allowed -
- Can Amanda server 2.5.2 talk to old amanda client 2.4.2p2
- almost done! - amrecover - can't talk to tape server
- What's the default password for amandabackup?
- Segmentation Fault During "Extract"
- Newbie trying to use Samba - no joy
- meridia
- dump larger than tape
- How can I get all the backup set list?
- How to get needed index files of given restore files?
- ok, I am done with amanda
- amflush oddity
- Amrecover Errors
- Mixed MySQL / filesystem backups
- net taps
- phentermine online
- best mp3 collection
- lime da vinci
- backup data in realtime ?
- download mp3
- Backing up DHCP clients / Client initiated backups
- hyip-catalog.com - information about the HYIPs and AutoSurfs !
- Amanda and the use of hard disk instead of tape
- amlabel permission problem...
- Many interesting links of ****!!
- Okay to upgrade clients to 2.5.2p1-1 with server at 2.5.1p3-1?
- amanda-2.4.4 selfcheck request failed: timeout waiting for ACK
- problem: Slit Dumps across tapes
- call timeout error
- Change tapes without prompting
- Report data missing for Windows share
- selfcheck request failed: timeout waiting for ACK
- selfcheck request failed: timeout waiting for ACK
- can 2 copies of amrecover be executed simultaneously?
- Erase Virtual Tape - HOW?
- Automatic Tape Ejection and Your View of My Backup Plan
- Is it possible by amanda
- amanda with TapeChanger using chg-zd-mtx problems
- Can't trust AMANDA's backup decisions !
- Analyzing the reports
- Schily tar (star)
- Amcheck OK, amdump timeout waiting for ACK
- amdump problem...
- amdump fails with planner: ERROR Request to mail.mydomain.com failed: timeout waiting
- chg-multi errors after upgrading server 2.5.1p3 to 2.5.2p1
- amrecover error
- Runing a script before amanda start
- Username consistency
- Library with 2 Drives, Using one for Backup one for Restores?
- Splitting up the Disklist File
- index files owned as root, not amandabackup, plus 0-len holding disk files?
- TCP or UDP?